Voltage Level Translator 8-Pin DSBGA T/R

The TXS0202 is a 2-bit voltage level translator optimized for use in Interchip USB (IC-USB) applications. VCCA and VCCB can each operate over the full range of 1.65 V to 3.6 V. The device has beendesigned to maintain cross-over skew to be less than 1 ns. The device has integrated pull-ups and pull-down resistors to aid in the protocol communication between a host and a peripheral. The translator is a buffered auto-direction sensing type translator. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

No Direction Control Signal Required

V_CCA, V_CCB Supply Voltage: 1.65 V to 3.6 V

Meets All Requirements of the IC-USB Standard

Small Packages: WCSP

Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

I_off Supports Partial-Power-Down Mode Operation

ESD Performance

• A port (Host-Side)
  • 2000-V Human-Body Model
  • 100-V Machine Model
  • 500-V Charged-Device Model
• B port (Peripheral-Side)
  • >4kV HBM