Voltage Level Translator 20-Pin BGA MICROSTAR JUNIOR T/R

This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCBaccepts any supply voltage from 1.65 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state To ensure the high-impedance state during power up or power down, OE should be tied to GND through apulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

• No Direction-Control Signal Needed
• Max Data Rates
  • 60 Mbps (Push Pull)
  • 2 Mbps (Open Drain)
• 1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (V CCA = VCCB)
• No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22 (A Port)
  • 2000-V Human Body Model (A114-B)
  • 150-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)
• IEC 61000-4-2 ESD (B Port)
  • ±8-kV Contact Discharge
  • ±6-kV Air-Gap Discharge