Volt Supervisor Sequencer 32-Pin TQFN EP

The MAX6874/MAX6875 EEPROM-configurable, multivoltage supply sequencers/supervisors monitor several voltage detector inputs and general-purpose logic inputs, and provide programmable open-drain outputs for highly configurable power-supply sequencing applications. The MAX6874 provides six voltage monitor inputs, four general-purpose inputs, and eight programmable open-drain outputs. The MAX6875 provides four voltage monitor inputs, three general-purpose inputs, and five programmable open-drain outputs. Manual reset and margin disable inputs provide additional flexibility. All voltage detectors offer configurable thresholds for undervoltage detection. One high-voltage input (IN1) provides detector threshold voltages from +2.5V to +13.2V in 50mV increments, or from +1.25V to +7.625V in 25mV increments. A second positive input (IN2) provides detector threshold voltages from +2.5V to +5.5V in 50mV increments, or from +1.25V to +3.05V in 25mV increments. Positive inputs (IN3-IN6) provide detector threshold voltages from +1V to +5.5V in 20mV increments, or from +0.5V to +3.05V in 10mV increments. Programmable output stages control power-supply sequencing or system resets/interrupts. Program the open-drain outputs as active-high or active-low. Programmable timing delay blocks configure each output to wait between 25µs and 1600ms before deasserting. An SMBus/I²C-compatible serial data interface programs and communicates with the configuration EEPROM, the configuration registers, and the internal 4kb user EEPROM of the MAX6874/MAX6875. The MAX6874/MAX6875 are available in a 7mm x 7mm x 0.8mm, 32-pin TQFN package and operate over the extended temperature range (-40°C to +85°C).

• Six (MAX6874) or Four (MAX6875) Configurable Input Voltage Detectors
  • One High-Voltage Input (+1.25V to +7.625V or +2.5V to +13.2V Thresholds)
  • One Voltage Input (+1.25V to +3.05V or +2.5V to +5.5V)
  • Four (MAX6874) or Two (MAX6875) Positive Voltage Inputs (+0.5V to +3.05V or +1V to +5.5V)

Four (MAX6874) or Three (MAX6875) General-Purpose Logic Inputs

Two Configurable Watchdog Timers

Eight (MAX6874) or Five (MAX6875) Programmable Open-Drain Outputs

• Active-High or Active-Low
• Timing Delays from 25µs to 1600ms

Margining Disable and Manual-Reset Controls

4kb Internal User EEPROM

• Endurance: 100,000 Erase/Write Cycles
• Data Retention: 10 Years

I²C/SMBus-Compatible Serial Configuration/Communication Interface

±1% Threshold Accuracy