Video Amp Single 3.6V 6-Pin UDFN T/R

The MAX9502 small, low-power video amplifier with integratedreconstruction filter operates from a supply voltageas low as 2.5V. The small size and the low minimum supplyvoltage make the MAX9502 ideal for portable applicationsor small, low-power applications. The MAX9502 DC-couples the input and the output,resulting in a very small solution. The MAX9502 inputcan be directly connected to the output of a video digitaltoanalogconverter (DAC). The reconstruction filter isimplemented as a 4th-order Chebyshev with a minimumpassband of 5.5MHz, 3dB attenuation at 8MHz, and 55dBattenuation at 27MHz. The output amplifier provides a closed-loop gain of +6dB(MAX9502G) or +12dB (MAX9502M), and can drive a 2VP-Pvideo signal into a 150O load to ground. The output signalis level-shifted so the sync tip is 110mV (typ) above ground.The MAX9502 operates from a 2.5V to 3.6V single supply andconsumes only 5.3mA quiescent supply current. An active-lowshutdown mode reduces the supply current to 0.01µA.The MAX9502 is available in tiny 6-pin µDFN (1mm x1.5mm x 0.8mm) and 5-pin SC70 packages. The deviceis specified over the -40°C to +85°C extended and -40°Cto +125°C automotive temperature ranges.

• Tiny 6-Pin µDFN (1mm x 1.5mm x 0.8mm) and 5-Pin SC70 Packages
• DC-Coupled Input and Output Save Board Space
• 4-Pole Chebyshev Filter
• 5.5MHz Passband
• 55dB Attenuation at 27MHz
• 0.01µA Low-Current Shutdown Mode
• 2.5V to 3.6V Single-Supply Operation
• Video Amplifier with Fixed Gains of +6dB (MAX9502G) or +12dB (MAX9502M)