USB Type-C Port Controller 20-Pin CSP T/R

EZ-PD CCG2 is a USB Type-C controller that complies with the latest USB Type-C and PD standards. EZ-PD CCG2 provides a complete USB Type-C and USB Power Delivery port control solution for passive cables, active cables, and powered accessories. It can also be used in many upstream and downstream facing port applications. EZ-PD CCG2 uses Cypress’s proprietary M0S8 technology with a 32-bit, 48-MHz ARM Cortex-M0 processor with 32-KB flash and integrates a complete Type-C Transceiver including the Type-C termination resistors RP, RD and RA.

• 32-bit MCU Subsystem
  • 48-MHz ARM Cortex-M0 CPU
  • 32-KB Flash
  • 4-KB SRAM
  • In-system reprogrammable
• Integrated Digital Blocks
  • Integrated timers and counters to meet response times required by the USB-PD protocol
  • Run-time reconfigurable serial communication block (SCB) with reconfigurable I2C, SPI, or UART functionality
• Clocks and Oscillators
  • Integrated oscillator eliminating the need for external clock
• Type-C Support
  • Integrated transceiver (baseband PHY)
  • Integrated UFP (RD), EMCA (RA) termination resistors, and current sources for DFP (RP)
  • Supports one USB Type-C port
• Low-Power Operation
  • 2.7-V to 5.5-V operation
  • Two independent VCONN rails with integrated isolation between the two
  • Independent supply voltage pin for GPIO that allows 1.71-V to 5.5-V signaling on the I/Os
  • Reset: 1.0 µA, Deep Sleep: 2.5 µA, Sleep: 2.0 mA
• System-Level ESD on CC and VCONN Pins
  • ± 8-kV Contact Discharge and ±15-kV Air Gap Discharge based on IEC61000-4-2 level 4C
• Packages
  • 1.63 mm × 2.03 mm, 20-ball wafer-level CSP (WLCSP) with 0.4-mm ball pitch
  • Supports industrial temperature range (-40 °C to +85 °C)