USB Transceiver 1TR 12Mbps 16-Pin UCSP T/R

The MAX3344 USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5k? USB pullup resistor supports full-speed (12Mbps) USB operation. The MAX3344 provide built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC. The MAX3344 operate with logic supply voltages as low as 1.65V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 40µA. An enumerate function allows devices to logically disconnect while plugged in. The MAX3344 are fully compliant with USB specification 1.1, and full-speed operation under USB specification 2.0. The MAX3344 have a USB detect that monitors the USB bus for insertion and signals this event. The MAX3344E USB_DET threshold is between 3.6V (min) and 4V (max), while the MAX3345E USB_DET threshold is between 1V (min) and 2.8V (max). The MAX3344 are available in the miniature 4 ? 4 UCSP, as well as the small 16-pin TSSOP, and are specified over the extended temperature range, -40°C to +85°C.

• ±15kV ESD Protection On D+ and D-
• Comply with USB Specification 1.1 (Full Speed 2.0)
• Separate VP and VM Inputs/Outputs
• VL Down to 1.65V Allows Connection with LowVoltage ASICs
• Enumerate Input-Allows USB Connection through Software
• USB Detect Function
  • 3.6V (min) to 4V (max)-MAX3344E
  • 1V (min) to 2.8V (max)-MAX3345E
• Allow Single-Ended or Differential Logic I/O
• Internal Linear Regulator Allows Direct Powering from the USB
• Internal Pullup Resistor for Full-Speed Operation
• Three-State Outputs
• No Power-Supply Sequencing Required
• Driver Active in Suspend Mode
• Available in Miniature Chip-Scale Package