USB 2.0 TO UART PROTOCOL CONVERTER WITH GPIO

The MCP2200 is a USB-to-UART serial converter which enables USB connectivity in applications that have a UART interface. The device reduces external components by integrating the USB termination resistors. The MCP2200 also has 256 bytes of integrated user EEPROM.The MCP2200 has eight general purpose Input/output pins. Four pins have alternate functions to indicate USB and communication status.

• Universal Serial Bus (USB)
• Supports full-speed USB (12 Mb/s)
• Implements USB protocol composite device CDC device for communications, configuration and I/O control
• 128 byte buffer to handle data throughput at any UART baud rate:
  • 64 byte transmit
  • 64 byte receive
• Fully configurable VID and PID assignments, and string descriptors
• Bus powered or self-powered
• USB 2.0 Compliant (certification #: TBD) USB Driver and Software Support
• Uses standard Microsoft® Windows® drivers for Virtual Com Port (VCP):
  • Windows XP(SP2 and later)/Vista/7
• Configuration utility for initial configuration Universal Asynchronous Receiver/Transmitter (UART)
• Responds to SET LINE CODING commands to dynamically change baud rates
• Supports baud rates: 300-1000k
• Hardware flow control
• UART signal polarity option General Purpose Input/output (GPIO) Pins
• Eight (8) general purpose I/O pins EEPROM
• 256 bytes of user EEPROM Other
• USB activity LED outputs (TxLED and RxLED)
• SSPND output pin
• USBCFG output pin (indicates if requested current is allowed)
• Operating voltage: 3.0-5.5V
• Oscillator input: 12 MHz
• ESD protection > 4 kV HBM
• Industrial (I) Operating Temperature: -40°C to +85°C
• Tape and Reel Packaging