Temp Sensor Analog 5-Pin SC-70 T/R

The LM94022 is a precision analog output CMOS integrated-circuit temperature sensor that operates at a supply voltage as low as 1.5 Volts. A class-AB output structure gives the LM94022 strong output source and sink current capability for driving heavy loads. For example, it is well suited to source the input of a sample-and-hold analog-to-digital converter with its transient load requirements. While operating over the wide temperature range of -50°C to +150°C, the LM94022 delivers an output voltage that is inversely proportional to measured temperature. The LM94022’s low supply current makes it ideal for battery-powered systems as well as general temperature sensing applications.Two logic inputs, Gain Select 1 (GS1) and Gain Select 0 (GS0), select the gain of the temperature-to-voltage output transfer function. Four slopes are selectable: -5.5 mV/°C, -8.2 mV/°C, -10.9 mV/°C, and -13.6 mV/°C. In the lowest gain configuration (GS1 and GS0 both tied low), the LM94022 can operate with a 1.5V supply while measuring temperature over the full -50°C to +150°C operating range. Tying both inputs high causes the transfer function to have the largest gain of -13.6 mV/°C for maximum temperature sensitivity. The gain-select inputs can be tied directly to VDD or Ground without any pull-up or pull-down resistors, reducing component count and board area. These inputs can also be driven by logic signals allowing the system to optimize the gain during operation or system diagnostics.

LM94022Q is AEC-Q100 Grade 0 qualified and
is Manufactured on an Automotive Grade Flow

Low 1.5V Operation

Push-Pull Output with 50µA Source Current
Capability

Four Selectable Gains

Very Accurate Over Wide Temperature Range of
 -50°C to +150°C

Low Quiescent Current

Output is Short-Circuit Protected

Extremely Small SC70 Package

Footprint Compatible with the Industry-Standard
LM20 Temperature Sensor