Single Chip Transceiver 1TX 1RX 100-Pin CS-BGA

The DS2155 is a software-selectable T1, E1, or J1 single-chip transceiver (SCT) for short-haul and long-haul applications. The DS2155 is composed of a line interface unit (LIU), framer, HDLC controllers, and a TDM backplane interface, and is controlled by an 8-bit parallel port configured for Intel or Motorola bus operations. The DS2155 is pin and software compatible with the DS2156. The LIU is composed of transmit and receive interfaces and a jitter attenuator. The transmit interface is responsible for generating the necessary waveshapes for driving the network and providing the correct source impedance depending on the type of media used. T1 waveform generation includes DSX-1 line buildouts as well as CSU line buildouts of -7.5dB, -15dB, and -22.5dB. E1 waveform generation includes G.703 waveshapes for both 75O coax and 120O twisted cables. The receive interface provides network termination and recovers clock and data from the network.

• Complete T1/DS1/ISDN-PRI/J1 Transceiver Functionality
• Complete E1 (CEPT) PCM-30/ISDN-PRI Transceiver Functionality
• Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and Waveshaping
• CMI Coder/Decoder for Optical I/F
• Crystal-Less Jitter Attenuator
• Fully Independent Transmit and Receive Functionality
• Dual HDLC Controllers
• Programmable BERT Generator and Detector
• Internal Software-Selectable Receive and Transmit-Side Termination Resistors for 75O/100O/120O T1 and E1 Interfaces
• Dual Two-Frame Elastic-Store Slip Buffers that Connect to Asynchronous Backplanes Up to 16.384MHz
• 16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz Clock Output Synthesized to Recovered Network Clock