Shift Register Single 4-Bit Serial/Parallel to Parallel 16-Pin SOIC T/R

The ’HC194 and CD74HCT194 are 4-bit shift registers with Asynchronous Master Reset (MR)\. In the parallel mode (S0 and S1 are high), data is loaded into the associated flip-flop and appears at the output after the positive transition of the clock input (CP). During parallel loading serial data flow is inhibited. Shift left and shift right are accomplished synchronously on the positive clock edge with serial data entered at the shift left (DSL) serial input for the shift right mode, and at the shift right (DSR) serial input for the shift left mode. Clearing the register is accomplished by a Low applied to the Master Reset (MR)\ pin.

Four Operating Modes

• Shift Right, Shift Left, Hold and Reset

Synchronous Parallel or Serial Operation

Typical f_MAX = 60MHz at V_CC = 5V, C_L = 15pF, T_A = 25°C

Asynchronous Master Reset

Fanout (Over Temperature Range)

• Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
• Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads

Wide Operating Temperature Range . . . –55°C to 125°C

Balanced Propagation Delay and Transition Times

Significant Power Reduction Compared to LSTTL Logic ICs

HC Types

• 2V to 6V Operation
• High Noise Immunity: N_IL = 30%, N_IH = 30% of V_CC at V_CC = 5V

HCT Types

• 4.5V to 5.5V Operation
• Direct LSTTL Input Logic Compatibility, V_IL = 0.8V (Max), V_IH = 2V (Min)
• CMOS Input Compatibility, I_l = 1µA at V_OL, V_OH