SERIAL OUTPUT, 5.6µS, 12-BIT ADC WITH REFERENCE

The MAX17411 is dual-output, step-down, constant on-time Quick-PWMK controllers for VR12/IMVP-7 CPU core supplies. The controllers consist of two high-current switching power supplies for CPU and GFX cores. The CPU regulator (regulator A) is a three-phase constant on-time architecture. The GFX regulator (regulator B) is also constant on-time architecture. The MAX17411 supports 2-phase operation and the MAX17511/MAX17511C/MAX17511N/MAX17511T support 1-phase operation. The MAX17411/MAX17511/ MAX17511C/MAX17511N/MAX17511T include two internal drivers on regulator A and one internal driver on regulator B. External drivers such as the MAX17491 enable the additional phases. Both regulator A and regulator B include output voltage sensing and accurate load-line gain. Switching frequencies are programmable from 200kHz to 600kHz per phase. Output overvoltage protection (OVP, MAX17411/ MAX17511/MAX17511C/MAX17511N), undervoltage protection (UVP), and thermal protection ensure effective and reliable operation. When any of these protection features detect a fault, the controller shuts down both outputs. The multiphase regulators include transient-phase overlap and active overshoot suppression, which speed up the response time and reduce the total output capacitance. The CPU and GFX outputs are controlled independently by writing the appropriate data into a functionmapped register file. VID code transitions and soft-start are enabled with a precision slew-rate control circuit. The SVID interface also allows each regulator to be individually set into a low-power, single-phase, pulse-skipping state to optimize efficiency. The MAX17411 is available in a 48-pin, 6mm x 6mm, TQFN package. The MAX17511/ MAX17511C/MAX17511N/MAX17511T are available in a 40-pin, 5mm O 5mm, TQFN lead-free package

• Intel VR12/IMVP-7-Compliant Serial Interface
• 3-/2-/1-Phase Quick-PWM CPU Core Regulator
  • Two Internal Drivers and One External Driver
  • Transient-Phase Overlap Mode
  • Dynamic Phase Selection
• 2-/1-Phase Quick-PWM GFX Regulator
  • One Internal and One External Driver
• Active Overshoot Suppression
• 8-Bit VR12/IMVP-7 DAC
• ±0.5% VOUT Accuracy Over Line, Load, and Temperature
• Active Voltage Positioning with Programmable Gain
• Accurate Lossless Current Balance
• Accurate Droop and Current Limit
• Remote Output and Ground Sense
• Power-Good Window Comparators (POKA and POKB)
• 4.5V to 24V Battery-Input Voltage Range
• Programmable 200kHz to 600kHz Switching Frequency
• External Thermal-Fault Detection Output (VR_HOT#)
• Overvoltage (MAX17411/MAX17511/MAX17511C/ MAX17511N), Undervoltage, and Thermal-Fault Protection
• Slew-Rate Controlled Soft-Start
• Passive Soft-Shutdown (20I Discharge Switches)
• Integrated Boost Switches
• Low-Profile, 48-Lead/40-Lead TQFN Packages