Processor Supervisor 4.63V/3.08V 1.8V/2.5V/3V/3.3V/5V 5-Pin SOT-23 T/R

The MAX6351-MAX6360 microprocessor (µP) supervisors with multiple reset voltages significantly improve system reliability and accuracy compared to separate ICs or discrete components. If any input supply voltage drops below its associated preset threshold, all reset outputs are asserted. In addition, the outputs are valid as long as either input supply voltage remains greater than +1.0V. All devices in this series have an active-low debounced manual reset input. In addition, the MAX6358/MAX6359/MAX6360 offer a watchdog-timer input with a 46.4s startup timeout period and a 2.9s timeout period. The MAX6355/MAX6356/MAX6357 offer an additional voltage monitor input to monitor a third voltage. The MAX6351 features two active-low, push-pull reset outputs, one is referenced to VCC1 and the other is referenced to VCC2. The MAX6353/MAX6356/MAX6359 offer an active-low, push-pull reset output referenced to VCC1. The MAX6354/MAX6357/MAX6360 offer an active-low, push-pull reset output referenced to VCC2. All these devices are offered with a wide variety of voltage threshold levels, as shown in the Voltage Threshold Levels table. They are available in 5- and 6-pin SOT23 packages and operate over the extended (-40°C to +85°C) temperature range.

• Precision Monitoring of Multiple+1.8V, +2.5V, +3.0V, +3.3V, and +5V Power-Supply Voltages
• Precision Factory-Set Power-Supply Reset Thresholds
• 20µA Supply Current
• 100ms min Power-On Reset Pulse Width
• Debounced TTL/CMOS-Compatible Manual-Reset Input
• Watchdog Timer
  • 46.4s Startup Timeout
  • 2.9s Normal Timeout

Fully Guaranteed Over Temperature

Guaranteed RESET-bar Valid to V_CC1 = 1V or V_CC2 = 1V

Power-Supply Transient Immunity

No External Components for Dual-Voltage Systems

Small 5- and 6-Pin SOT23 Packages

Low Cost