Processor Supervisor 4.62V 2.75V to 5.5V 16-Pin SOIC N T/R

The MAX792/MAX820 microprocessor (µP) supervisory circuits provide the most functions for power-supply and watchdog monitoring in systems without battery backup. Built-in features include the following: µP reset: Assertion of RESET and active-low RESET outputs during power-up, power-down, and brownout conditions. Active-low RESET is guaranteed valid for VCC down to 1V. Manual-reset input. Two-stage power-fail warning: A separate low-line comparator compares VCC to a preset threshold 120mV above the reset threshold; the low-line and reset thresholds can be programmed externally. Watchdog fault output: Assertion of active-low WDO if the watchdog input is not toggled within a preset timeout period. Pulsed watchdog output: Advance warning of impending active-low WDO assertion from watchdog timeout that causes hardware shutdown. Write protection of CMOS RAM, EEPROM, or other memory devices. The MAX792 and MAX820 are identical, except the MAX820 guarantees higher low-line and reset threshold accuracy (±2%).

• Manual-Reset Input
• 200ms Power OK/Reset Time Delay
• Independent Watchdog Timer-Preset or Adjustable
• On-Board Gating of Chip-Enable Signals
• Memory Write-Cycle Completion
• 10ns (max) Chip-Enable Gate Propagation Delay
• Voltage Monitor for Overvoltage Warning
• ±2% Reset and Low-Line Threshold Accuracy (MAX820, external programming mode)