Processor Supervisor 4.625V 3V/3.3V/5V 8-Pin SOIC N T/R

The MCP130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. Both devices are available with a choice of seven different trip voltages and both have open drain outputs. The MCP130 has an internal 5 k? pullup resistor. Both devices have active low RESET pins. The MCP130 will assert the RESET signal whenever the voltage on the Vdd pin is below the trip-point voltage.

• Holds microcontroller in reset until supply voltage reaches stable operating level
• Resets microcontroller during power loss
• Precision monitoring of 3V, 3.3V and 5V systems
• 7 voltage trip points available
• Active low RESET pin
• Open drain output
• Internal pull-up resistor (5 k?) for MCP130
• Holds RESET for 350 ms (typical)
• RESET to V_cc = 1.0V
• Accuracy of ±125 mV for 5V systems and ±75 mV for 3V systems over temperature
• 45 µA typical operating current
• Temperature range:
  • Industrial (I): -40°C to +85°C
• Tape and Reel Packaging