Processor Supervisor 0.833V 0.9V to 1.5V 5-Pin SOT-23
The MAX6841–MAX6845 microprocessor (µP) supervisory circuits monitor ultra-low-voltage power supplies in µP and digital systems. They provide excellent circuit reliability at low cost by eliminating external components and adjustments when used with +0.9V to +1.5V systems. Factory-trimmed reset thresholds are available for the MAX6841/MAX6842. The MAX6843/MAX6844/MAX6845 provide a RESET IN input, allowing the user to externally adjust the reset threshold. The MAX6841–MAX6845 family features a debounced manual reset input (active-low MR). The reset comparator is designed to ignore fast transients on VCC. The MAX6841–MAX6845 assert a reset signal whenever the VCC supply voltage declines below a preset or adjustable threshold or whenever manual reset (active-low MR) is asserted. Reset remains asserted for a fixed timeout delay after VCC has risen above the reset threshold and when manual reset is deasserted. Five timeout periods are available for each part: 150µs (voltage detector version), 1.5ms, 30ms, 210ms, and 1.68s (typ). The MAX6841/MAX6843 have an active-low push-pull reset output. The MAX6841/MAX6842/MAX6844 have an active-high push-pull reset output, and the MAX6842/MAX6845 have an active-low open-drain reset output. The active-low open-drain reset output requires a pullup resistor that can be connected to a voltage from 0 to VCC. The low supply current (5.7µA) and small package (SOT23-5) make the MAX6841–MAX6845 ideal for use in portable equipment.
Guaranteed Reset Valid to VCC = 0.55V (Active Low) Manual Reset Input Immune to Short VCC Transients Space-Saving 5-Pin SOT23 Package
- Factory-Set Reset Threshold Voltages for Monitoring Supplies from 0.9V to 1.5V (MAX6841/MAX6842)
- Adjustable Threshold RESET IN (MAX6843/MAX6844/MAX6845)
- Low Power Consumption: 5.7µA (typ)
- ±2.5% Reset Threshold Accuracy Over Temperature
- Five Timeout Periods: 150µs (Voltage Detector Version), 1.5ms, 30ms, 210ms, and 1.68s
- Available in Three Output Configurations
- Push-Pull active-low RESET
- Push-Pull RESET
- Open-Drain active-low RESET
Характеристики
| Бренд | Maxim Integrated |
|---|---|
| Number Of | 1 |
| Chip Enab | Нет |
| Screening Level | Extended |
| Output Driver | Active High/Active Low/Open Drain/Push-Pull |
| Manual Reset | Да |
| Описание продукта | 2.9 x 1.63 x 1.1 mm |
| Minimum R | 0.81 V |
| Watchdog Timer | Нет |
| Maximum R | 0.855 V |
| Рабочая температура | -40 to 85 °C |
| Monitored | 0.9, 1.5 V |
| Power Fai | Нет |
| Battery B | Нет |
| Operating | 8.1 uA |
| Schedule B | 8542390000 |
| HTSN | 8542390001 |
| Minimum O | 0.75 V |
| Supplier | SOT-23 |
| Maximum R | 2240 ms |
| Maximum P | 571 mW |
| Maximum O | 1.8 V |
| Max Proce | 260|300 |
SKU: MAX6842EUKD4+