Processor Extension Pak For PIC18F1XK50

This family introduces a new line of Microchip devices: a 16-bit microcontroller family with a broad peripheral feature set and enhanced computational performance. The PIC24FJ64GA004 family offers a new migration option for those high-performance applications which may be outgrowing their 8-bit platforms, but don’t require the numerical processing power of a digital signal processor.

• High-Performance CPU
• Modified Harvard Architecture
• Up to 16 MIPS Operation @ 32 MHz
• 8 MHz Internal Oscillator with 4x PLL Option and Multiple Divide Options
• 17-Bit by 17-Bit Single-Cycle Hardware Multiplier
• 32-Bit by 16-Bit Hardware Divider
• 16-Bit x 16-Bit Working Register Array
• C Compiler Optimized Instruction Set Architecture:
  • 76 base instructions
  • Flexible addressing modes
• Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory Special Microcontroller Features
• Operating Voltage Range of 2.0V to 3.6V
• 5.5V Tolerant Input (digital pins only)
• High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
• Flash Program Memory:
  • 10,000 erase/write
  • 20-year data retention minimum
• Power Management modes:
  • Sleep, Idle, Doze and Alternate Clock modes
  • Operating current: 650 µA/MIPS, typical at 2.0V
  • Sleep current: 150 nA, typical at 2.0V
• Fail-Safe Clock Monitor (FSCM) Operation:
  • Detects clock failure and switches to on-chip, low-power RC oscillator
• On-Chip, 2.5V Regulator with Tracking mode
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with On-Chip, Low-Power RC Oscillator for Reliable Operation
• In-Circuit Serial Programming™ (ICSP™) and In-Circuit Debug (ICD) via 2 Pins
• JTAG Boundary Scan Support
• Analog Features
• 10-Bit, up to 13-Channel Analog-to-Digital Converter:
  • 500 ksps conversion rate
  • Conversion available during Sleep and Idle
• Dual Analog Comparators with Programmable Input/Output Configuration
• Peripheral Features
• Peripheral Pin Select (PPS):
  • Allows independent I/O mapping of many peripherals
  • Up to 26 available pins (44-pin devices)
  • Continuous hardware integrity checking and safety interlocks prevent unintentional configuration changes
• 8-Bit Parallel Master/Slave Port (PMP/PSP):
  • Up to 16-bit multiplexed addressing, with up to 11 dedicated address pins on 44-pin devices
  • Programmable polarity on control lines
• Hardware Real-Time Clock/Calendar (RTCC):
  • Provides clock, calendar and alarm functions
• Programmable Cyclic Redundancy Check (CRC)
• Two 3-Wire/4-Wire SPI modules (support 4 Frame modes) with 8-Level FIFO Buffer
• Two I2C™ modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
• Two UART modules:
  • Supports RS-485, RS-232, and LIN/J2602
  • On-chip hardware encoder/decoder for IrDA®
  • Auto-wake-up on Start bit
  • Auto-Baud Detect
  • 4-level deep FIFO buffer
• Five 16-Bit Timers/Counters with Programmable Prescaler
• Five 16-Bit Capture Inputs
• Five 16-Bit Compare/PWM Outputs
• Configurable Open-Drain Outputs on Digital I/O Pins
• Up to 3 External Interrupt Sources