Power Switch Hi Side 70A 30-Pin PowerSO T/R

The VND5004BTR-E and VND5004BSP30-E are devices made using STMicroelectronics VIPower technology. They are intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp and load dump protection circuit protect the devices against transients on the Vcc pin (see ISO7637 transient compatibility table). These devices integrate an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is high impedance. Output current limitation protects the devices in overload condition. In case of long duration overload, the devices limit the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown with automatic restart allows the device to recover normal operation as soon as a fault condition disappears.

General Inrush current active management by power limitation Very low standby current 3.0 V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive

Diagnostic functions Proportional load current sense Current sense disable Thermal shutdown indication

Protection Undervoltage shutdown Overvoltage clamp Load current limitation Thermal shutdown Self limiting of fast thermal transients Protection against loss of ground and loss of V_CC Reverse battery protection with self switch on of the Power MOSFET Electrostatic discharge protection application

All types of resistive, inductive and capacitive loads

Suitable for power management applications