Module DC-DC 1-OUT 3.3V 5A 15W T/R

The SSTW005A0F Barracuda series power modules are isolated dc-dc converters that operate over an ultra-wide input voltage range of 36Vdc -75Vdc and provide a single precisely regulated output voltage at 3.3Vdc. This series is a low cost, smaller size alternative to the existing LW/LAW/LC/SC/SW with enhanced performance parameters. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency of 87.5% typical at full load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully self-protected with output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include negative or positive on/off logic and SMT connections.

• Compliant to RoHS II EU “Directive 2011/65/EU (-Z versions)
• Compliant to REACH Directive (EC) No 1907/2006
• Ultra-wide Input Voltage Range, 36Vdc to 75Vdc
• No minimum load
• High efficiency – 87.5% at full load (Vin=48Vdc)
• Constant switching frequency
• Low output ripple and noise
• Small Size and low profile, follows industry standard 1x1 footprint 27.9mm x 24.4mm x 8.5mm (MAX) (1.10 x 0.96 x 0.335 in)
• Surface mount (SMT) or Through hole (TH)
• Reflow process compliant, both SMT and TH versions
• Positive Remote On/Off logic
• Output overcurrent/voltage protection (hiccup)
• Over-temperature protection
• Output Voltage adjust: 90% to 110% of Vo,nom
• Wide operating temperature range (-40°C to 85°C)
• UL*Recognized to UL60950-1, CAN/CSA† C22.2 No.60950-1, and EN60950-1(VDE ‡ 0805-1) Licensed
• CE mark meets 2006/95/EC directive§
• Meets the voltage and current requirements for ETSI 300- 132-2 and complies with and licensed for Basic insulation rating per EN60950-1
• 2250 Vdc Isolation tested in compliance with IEEE 802.3¤ PoE standards
• ISO** 9001 and ISO 14001 certified manufacturing facilities