MCU 32-Bit

The ultra-low-power STM32L052x6/8 family incorporates the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM Cortex-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (64 Kbytes of Flash program memory, 2 Kbytes of data EEPROM and 8 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.The STM32L052x6/8 devices provide high power efficiency for a wide range of performance. It is achieved with a large choice of internal and external clock sources, an internal voltage adaptation and several low-power modes.The STM32L052x6/8 devices offer several analog features, one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, several timers, one low-power timer (LPTIM), three general-purpose 16-bit timers and one basic timer, one RTC and one SysTick which can be used as timebases. They also feature two watchdogs, one watchdog with independent clock and window capability and one window watchdog based on bus clock.Moreover, the STM32L052x6/8 devices embed standard and advanced communication interfaces: up to two I²Cs, two SPIs, one I²S, two USARTs, a low-power UART (LPUART), and a crystal-less USB. The devices offer up to 24 capacitive sensing channels to simply add touch sensing functionality to any application.The STM32L052x6/8 also include a real-time clock and a set of backup registers that remain powered in Standby mode.The ultra-low-power STM32L052x6/8 devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +105 °C temperature range, extended to 125 °C in low-power dissipation state. A comprehensive set of power-saving modes allows the design of low-power applications.

Ultra-low-power platform

1.65 V to 3.6 V power supply

-40 to 125 °C temperature range

0.27 µA Standby mode (2 wakeup pins)

0.4 µA Stop mode (16 wakeup lines)

0.8 µA Stop mode + RTC + 8 KB RAM retention

139 µA/MHz Run mode at 32 MHz

3.5 µs wakeup time (from RAM)

5 µs wakeup time (from Flash)

Core: ARM® 32-bit Cortex®-M0+ with MPU

From 32 kHz up to 32 MHz max.

0.95 DMIPS/MHz

Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds

Ultralow power POR/PDR

Programmable voltage detector (PVD)

Clock sources

1 to 25 MHz crystal oscillator

32 kHz oscillator for RTC with calibration

High speed internal 16 MHz factory-trimmed RC (+/- 1%)

Internal low-power 37 kHz RC

Internal multispeed low-power 65 kHz to 4.2 MHz RC

Internal self calibration of 48 MHz RC for USB

PLL for CPU clock

Pre-programmed bootloader

USART, SPI supported

Development support

Serial wire debug supported

Up to 51 fast I/Os (45 I/Os 5V tolerant)

Memories

Up to 64 KB Flash with ECC

8 KB RAM

2 KB of data EEPROM with ECC

20-byte backup register

Sector protection against R/W operation

Rich Analog peripherals (down to 1.8 V)

12-bit ADC 1.14 Msps up to 16 channels (down to 1.65 V)

12-bit 1 channel DAC with output buffers (down to 1.8 V)

2x ultra-low-power comparators (window mode and wake up capability, down to 1.8 V)

Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors

7-channel DMA controller, supporting ADC, SPI, I2C, USART, DAC, Timers

8x peripherals communication interface

1x USB 2.0 crystal-less, battery charging detection and LPM

2x USART (ISO 7816, IrDA) 1x UART (low power)

2x SPI 16 Mbits/s

2x I2C (SMBus/PMBus)

9x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC, 1x 16-bit basic for DAC, and 2x watchdogs (independent/window)

CRC calculation unit, 96-bit unique ID

True RNG and firewall protection

All packages are ECOPACK®2