MCCPL133-27GI-R

The PL133-97 is an advanced fan-out buffer design for high performance, low-power, small form factor applications. The PL133-97 accepts a reference clock input from DC to 150MHz and provides 6 outputs of the same frequency.The PL133-97 is offered in a QFN-16L 3x3mm package and it offers the best phase noise, additive jitter performance, and lowest power consumption of any comparable IC.The PL133-97 outputs can be disabled to a high impedance (tristate) by pulling low the OE pin. When the OE pin is high, the outputs are enabled and follow the REF input signal. When the OE pin is left open, a pull-up resistor on the chip will default the OE pin to logic 1 so the outputs are enabled.CLK8 is a free running output that remains enabled when the OE pin is pulled low.

• 1:9 LVCMOS output fanout buffer for DC to 150MHz
• 8mA Output Drive Strength
• Low power consumption for portable applications
• Low input-output delay
• Output-Output skew less than 250ps
• Low Additive Phase Jitter of 60fs RMS
• 2.5V to 3.3V, ±10% operation
• 1.8V ± 10% operation up to 67MHz
• Operating temperature range from -40°C to 85°C
• Available in 16-Pin QFN GREEN/RoHS package