MAXREFDES72 Arduino Platform Pmod Adapter

The MAXREFDES72# is capable of arbitrary pin mapping with a few restrictions. In general, the board is configured by writing to the MAX14661 multiplexer over the I2 C bus. As the Figure 2 shows, 8 Arduino digital GPIO are connected to the Pmod connector through level shifters and each of these 8 signals are also connected to the multiplexer. The 8 digital signals were chosen so that the Arduino Uno R3 SPI signals are connected for the Pmod Type 2 and to avoid the I2 C and UART signals at the Arduino headers. For Type 1 (GPIO) and Type 2 (SPI), no configuration is necessary. To implement Type 3, Type 4, I2 C, or other custom pin mappings that need access to I2 C, UART, or other real time functions such as PWM, configure the multiplexer to route the signals to the appropriate pins.

• Arduino® UNO R3 compatible
  • IOREF support for 3.3V or 5V signal levels
• 2x6 Digilent® Pmod™ compatible interface
  • Supports Pmod types 1, 2, 3, and 4, I2C and nonstandard pinouts
• Level shifting between Pmod and Arduino pins
• Precision RTC with integrated MEMS resonator