MAX9288 3.12Gbps GMSL De-Serializer Evaluation Kit

The MAX9288 gigabit multimedia serial link (GMSL) deserializers receive data from a GMSL serializer over 50O coax or 100O shielded twisted-pair (STP) cable and output deserialized data on the CSI-2 outputs. The deserializers pair with any GMSL serializer capable of coax output. When programmed for STP input, they are backward compatible with any GMSL serializer. The audio channel supports L-PCM I2S stereo and up to eight channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits. The embedded control channel operates at 9.6kbps to 1Mbps in UART-to-UART and UART-to-I2C modes, and up to 1Mbps in I2C-to-I2C mode. Two GPIO ports are included, allowing display power up and switching of the backlight, among other uses. A continuously sampled GPI input supports touch-screen controller interrupt requests in display applications. For use with longer cables, the deserializers have a programmable cable equalizer. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The GMSL supply is 3.0V to 3.6V, the MIPI CSI-2 supply is 1.7V to 1.9V, and the I/O supply is 1.7V to 3.6V. The devices are available in lead(Pb)-free, 48-pin, 7mm x 7mm TQFN and QFND packages with exposed pad and 0.5mm lead pitch.

• Ideal for High-Definition Video Applications
  • 4-Lane CSI-2 Output with Up to 1Gbps Per Lane
  • Works with Low-Cost 50O Coax Cable and FAKRA Connectors or 100O STP
  • 104MHz High-Bandwidth Mode Supports 1920 x 720p/60Hz Display with 24-Bit Color
  • Equalization Allows 15m Cable at Full Speed
  • Up to 192kHz Sample Rate and 32-Bit Sample Depth For 7.1 Channel HD Audio
  • Audio Clock from Audio Source or Audio Sink
  • Color Lookup Table for Gamma Correction
  • CNTL0-CNTL3 Control Outputs for HDMI/MHL
• Multiple Data Rates for System Flexibility
  • Up to 3.12Gbps Serial-Bit Rate
  • 6.25MHz to 104MHz Pixel Clock
  • 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock-Stretch Capability
• Reduces EMI and Shielding Requirements
  • Tracks Spread Spectrum on Input
  • High-Immunity Mode for Maximum Control Channel Noise Rejection
• Peripheral Features for System Power-Up and Verification
  • Built-In PRBS Tester for BER Testing of the Serial Link
  • Programmable Choice of 8 Default Device Addresses
  • Two Dedicated GPIO Ports
  • Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses
  • Remote/Local Wake-Up from Sleep Mode
• Meets Rigorous Automotive and Industrial Requirements
  • -40°C to +105°C Operating Temperature
  • ±8kV Contact and ±12kV Air ISO 10605 and IEC 61000-4-2 ESD Protection