Low Voltage Level Translators 16-Pin TSSOP

The MAX13002 channel level translators provide the level shifting necessary to allow data transfer in multivoltage systems. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as higher voltage logic signals on the VCC side of the device, and vice-versa. The MAX13002 feature a low VCC and VL quiescent supply current less than 4µA. The MAX13002 also have ±15kV ESD protection on the I/O VCC side for greater protection in applications that route signals externally. The ESD protection is specified using the Human Body Model (HBM). The MAX13002 operate at a guaranteed 230kbps data rate. The MAX13002 operate at a guaranteed 20Mbps data rate when VCC > +1.65V. The MAX13002 is bidirectional level translators, allowing data translation in either direction (VL ? VCC) on any single data line without a DIRECTION input. The MAX13002 unidirectional level translators level shift data in one direction (VL ? VCC or VCC ? VL) on any single data line. The MAX13002 unidirectional translator"s inputs have the capability to interface with both CMOS and open-drain (OD) outputs. The MAX13002 operate with +0.9V to +3.6V VL voltages and +1.5V to +3.6V VCC voltages. The MAX13002 are available in 16-bump UCSP and 16-pin TSSOP packages, and are specified over the extended -40°C to +85°C operating temperature range.

• Guaranteed Data-Rate Options 230kbps (MAX13002)
• Bidirectional Level Translation Without a DIRECTION Input
• Operational Down to +0.9V on VL and +1.5V on VCC
• ±15kV ESD Protection on I/O VCC Lines per HBM
• Low <4µA Quiescent Current
• Enable/Shutdown Control
• 2mm x 2mm, 16-Bump UCSP and Lead Packaging Options
• CMOS or Open-Drain Outputs Interface Capability