Low Power Bidirectional I2C Isolator 8-Pin SOIC Rail

The ISO1540 and ISO1541 devices are low-power, bidirectional isolators that are compatible with I2C interfaces. These devices have their logic input and output buffers separated by TI’s Capacitive Isolation technology using a silicon dioxide (SiO2) barrier. When used with isolated power supplies, these devices block high voltages, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.This isolation technology provides for function, performance, size, and power consumption advantages when compared to optocouplers. The ISO1540 and ISO1541 devices enable a complete isolated I2C interface to be implemented within a small form factor.The ISO1540 has two isolated bidirectional channels for clock and data lines while the ISO1541 has a bidirectional data and a unidirectional clock channel. The ISO1541 is useful in applications that have a single Master while the ISO1540 is ideally fit for multi-master applications.Isolated bidirectional communications is accomplished within these devices by offsetting the Side 1 Low-Level Output Voltage to a value greater than the Side 1 High-Level Input Voltage, thus preventing an internal logic latch that otherwise would occur with standard digital isolators.

Isolated Bidirectional, I²C Compatible,
Communication

Supports up to 1-MHz Operation

3-V to 5.5-V Supply Range

Open-Drain Outputs With 3.5-mA Side 1 and 35-
mA Side 2 Sink Current Capability

–40°C to +125°C Operating Temperature

±50-kV/µs Transient Immunity (Typical)

HBM ESD Protection of 4 kV on All Pins;
8 kV on Bus Pins

Safety and Regulatory Approvals

• 4242-V_PK Isolation per DIN V VDE V 0884-10
  (VDE V 0884-10): 2006-12
• 2500-V_RMS Isolation for 1 Minute per UL 1577
• CSA Component Acceptance Notice 5A, IEC
  60950-1 and IEC 61010-1 End Equipment
  Standards
• CQC Basic Insulation per GB4943.1-2011