Level Translator 40-Pin WLP T/R

The MAX14548 channel bidirectional level translators (LLTs) provide the level shifting necessary for 100Mbps data transfer in multivoltage systems. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a high-voltage logic signal on the VCC side of the device and vice versa. The devices feature a programming frequency input (PF) that adjusts the one-shot accelerator on-time to guarantee a bit rate of 100Mbps with a load capacitance < 15pF and VL > 1.1V (MAX14548). The MAX14548 can drive capacitive loads up to 50pF with a guaranteed bit rate of 40Mbps when VL R 1.1V and PF is driven high. The MAX14548 can drive capacitive loads up to 50pF with a guaranteed bit rate of 40Mbps when VL R 1.1V and PF is driven high. The device operate at full speed with external drivers that source as low as 4mA output current. Each I/O channel is pulled up to VCC or VL by an internal 35FA current source, allowing both devices to be driven by either push-pull or open-drain drivers. The devices feature multiple power-saving features including an enable input (EN) that places the device into a low-power shutdown mode when driven low and an automatic shutdown mode that disables the part when VCC is less than VL. The MAX14548 output driver is designed to operate at full speed (100Mbps) with VL > 1.4V, which reduces the dynamic supply current vs. the MAX14548. The state of I/O VCC_and I/O VL_are in high-impedance state during shutdown. The devices operate with VCC voltages from +1.7V to +3.6V and VL voltages from +1.1V to +3.6V, making them ideal for data transfer between low-voltage ASICs/ PLDs and higher voltage systems. The devices are available in a 40-bump WLP (2.16mm x 3.46mm) package with 0.4mm ball pitch, and operate over the extended -40NC to +85NC temperature range.

• Bidirectional Level Translation
• 100Mbps Guaranteed Data Rate
• +1.7V to +3.6V Supply Voltage Range for VCC
• +1.1V to +3.6V Supply Voltage Range for VL (VCC > VL)
• -40NC to +85NC Extended Operating Temperature Range