Level Translator 10-Pin uMAX EP

The MAX7306/MAX7307 I²C-/SMBus-compatible, serial-interfaced peripherals feature four level-translating I/Os and operate from a 1.62V to 3.6V power supply. The MAX7307 features a port supply (VLA) that allows level translation on I/O ports to operate from a separate power supply from 1.4V to 5.5V. The MAX7306 features an address select input (AD0) to allow up to four unique slave addresses. The MAX7306/MAX7307 ports P2, P3, and P4 can be configured as inputs, push-pull outputs, and open-drain outputs. Port P1 can be configured as a general-purpose input, open-drain output, or an open-drain active-low INT output. Ports P2 and P3 can be configured as OSCIN and OSCOUT, respectively. The MAX7306/MAX7307 include an internal oscillator for PWM, blink, and key debounce, or to cascade multiple MAX7306/MAX7307s. The external clock can be used to set a specific PWM and blink timing. The active-low RST input asynchronously clears the 2-wire interface and terminates a bus lockup involving the MAX7306/MAX7307. All ports configured as output feature 33-step PWM, allowing any output to be set from fully off, 1/32 to 31/32 duty cycle, to fully on. All output ports also feature LED blink control, allowing blink periods of 1/8 second, 1/4 second, 1/2 second, 1, 2, 4, or 8 seconds. Any port can blink during this period with a 1/16 to 15/16 duty cycle. The MAX7306/MAX7307 are specified over the -40°C to +125°C temperature range and are available in 10-pin µDFN (2mm x 2mm) and 10-pin µMAX packages.

• 1.4V to 5.5V I/O Level Translation Port Supply (V_LA)
• 1.62V to 3.6V Power Supply
• Four Individually Configurable GPIO Ports
  • P1 = Open-Drain I/O
  • P2, P3, P4 = Push-Pull or Open-Drain I/O

Individual 33-Step PWM Intensity Control

Blink Controls with 15 Steps on Outputs

1kHz PWM Period Provides Flicker-Free LED Intensity Control

25mA (max) Port Output Sink Current (100mA max Ground Current)

Inputs Overvoltage Protected Up to 5.5V (V_LA)

Transition Detection with Optional Interrupt Output

Optional Input Debouncing

Active-Low RST Input Clears Serial Interface, Can Restore Power-Up Default State, and Synchronizes Blink Timing

Oscillator Input and Output Enables Cascading Multiple Devices

Low 0.75µA (typ) Standby Current