Image Sensor Monochrome CMOS 3840x2500Pixels 52-Pin LCC Tray

The MANO9600 is a rolling shutter CMOS image sensor with a resolution of 3840 x 2500 pixels. The high sensitivity 2.4 m x 2.4 m pixels supports correlated double sampling readout reducing noise and increasing dynamic range. A high level of programmability using a four wire serial peripheral interface enables the user to read out specific regions of interest. Higher frame rates are achieved with region of interest or sub-sampled readout modes. The sensor has built-in features for bias control and power supply regulation. The sensor has on-chip programmable gain amplifiers and 10-bit A/D converters. The integration time and gain parameters can be reconfigured without any visible image artifact. Optionally the on-chip automatic exposure control loop (AEC) controls these parameters dynamically. The image’s black level is either calibrated automatically or can be adjusted by adding a user programmable offset. The image data interface of the M1-SM part consists of four LVDS lanes running at 620 Mbps, facilitating frame rates up to 20 frames per second. A separate synchronization and clock channel containing payload information is provided to facilitate the image reconstruction at the receive end. The M2-SM part provides a parallel CMOS output interface at reduced frame rate of 5 frames per second. The MANO 9600 is packaged in a 52-pin LCC package and is available in a monochrome without micro lens. 9.6 Megapixel Resolution in 3840 × 2500 Format 2.4 m × 2.4 m Square Pixels (Shared 4T Pixel Architecture) 2/3 inch Optical Format Monochrome (SM) Version 20 Frames per Second (fps) at Full Resolution 200 mW / 500 mW Power Consumption at 5 fps / 20 fps Four Low-Voltage Differential Signaling (LVDS) High Speed Serial Outputs or One 10-bit CMOS Output On-chip 10-bit Analog-to-Digital Converter (ADC) Windowing to Attain Higher Frame Rate Rolling Shutter On-chip Fixed Pattern Noise (FPN) Correction Serial Peripheral Interface (SPI) Automatic Exposure Control (AEC) Phase Locked Loop (PLL) High Dynamic Range (HDR) Dual Power Supply (1.8 V and 3.3 V) 0°C to 70°C Operational Temperature Range 52-pin LCC 500 mW Power Dissipation (LVDS) 200 mW Power Dissipation (CMOS) These Devices are Pb-Free and are RoHS Compliant