High Speed Peripheral Controller 80-Pin BGA MICROSTAR JUNIOR

The TUSB6015 is a USB 2.0 HS Peripheral Controller designed for seamless interface to an external Host processor through the NOR FLASH-like interface.The NOR FLASH-like interface is a 16-bit, multiplexed address/data, interface with support for synchronous burst and single asynchronous read/write access. Configuration registers are accessible via the asynchronous chip select only; the End Point FIFO"s are accessible via both the synchronous and asynchronous chip selects.The device also has eight user configurable general purpose I/0 interface pins. The GPIO can be configured as an interrupt or wakeup source. Some GPIO have secondary NOR-flash DMA Request functionality.The device is fully compliant with the Universal Serial Bus Specification Rev. 2.0.The ESD protection level is 2KV HBM (JESD22- A114D), 500V CDM (JESD22-C101C). 

USB 2.0 High-Speed (HS) Compliant Peripheral Controller Core

• USB-IF TID # 40630005

Integrated USB 2.0 PHY

NOR FLASH - Like External Host Interface

DP/DM lines are high impedance when the device is not powered

Six physical endpoints

• Each endpoint is configurable as IN or OUT with dedicated 1K buffer

NOR Flash Interface Access modes:

• Asynchronous 16-bit single access
• Asynchronous 32-bit single access
• Asynchronous 16x16 burst access w/ DMA
• Synchronous 16x16 burst access with DMA (Max GPMC clock is 65 MHz)

Interrupt on DP/DM line state change for CEA-936-A detect

VBUS MAX Voltage rating will be 6V for USB Charging

RoHS Complaint 80 Terminal BGA MICROSTAR JUNIOR Package