Hall Effect Sensor Omnipolar 3.3V/5V 3-Pin SIP Bulk

AH180 is a micro-power Omni polar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs. Based on two Hall- Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating range. To support portable and battery powered equipment the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24uW with a supply of 3V.The single open-drain output switches on with either a north or south pole of sufficient strength.When the magnetic flux density ( B ) is larger than operate point ( Bop ), output is switched on (Output pin is pulled low). The output is turned off when B becomes lower than the release point ( Brp ). The output will remain off when there is no magnetic field.The AH180 is available in SIP-3L, SC59, DFN2020-3, and DFN2020-6 packages.

• Omnipolar (north or south pole) operation
• Micropower operation
• Single open drain output
• 2.5V to 5.5V operating voltage
• Chopper stabilized design provides
• Superior temperature stability
• Minimal switch-point drift
• Enhanced immunity to stress
• Good RF noise immunity
• -40° C to 85° C operating temperature
• ESD (HBM)>5KV for DFN2020-6, DFN2020-3 > 6KV for SIP-3L and SC59
• Green Molding Compound (No Br, Sb)