H-Bridge Motor Driver 30-Pin MultiPowerSO T/R

The VNH3SP30-E is a full-bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver (HSD) and two low-side switches. The HSD switch is designed using STMicroelectronics proprietary VIPower M0-3 technology that efficiently integrates a true Power MOSFET with an intelligent signal/protection circuit on the same die. The low-side switches are vertical MOSFETs manufactured using STMicroelectronics proprietary EHD (“STripFET”) process.The three circuits are assembled in a MultiPowerSO-30 package on electrically isolated lead frames. This package, specifically designed for the harsh automotive environment, offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design provides superior manufacturability at board level. The input signals INA and INB can directly interface with the microcontroller to select the motor direction and the brake condition. Pins DIAGA/ENA or DIAGB /ENB, when connected to an external pull-up resistor, enable one leg of the bridge. They also provide a feedback digital diagnostic signal. The normal condition operation is explained in The speed of the motor can be controlled in all possible conditions by the PWM up to kHz. In all cases, a low level state on the PWM pin will turn off both the LSAand LSB switches. When PWM rises to a high level, LSA or LSB turn on again depending on the input pin state.

Output current: 30A

5V logic level compatible inputs

Undervoltage and overvoltage shutdown

Overvoltage clamp

Thermal shut down

Cross-conduction protection

Linear current limiter

Very low standby power consumption

PWM operation up to 10 kHz

Protection against loss of ground and loss of V_CC

Package: ECOPACK®