Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOP T/R
The M74HCT574 is a high speed CMOS OCTAL D-TYPE FLIP FLOP WITH 3-STATE OUTPUTS INVERTING fabricated with sub-micron silicon gate C2MOS technology. This 8 bit D-TYPE FLIP FLOP is controlled by a clock input (CK) and an output enable input (OE\\). On the positive transition of the clock, the Q outputs will be set to the logic states that were setup at the D inputs.
- HIGH SPEED: fMAX = 50MHz (TYP.) at VCC = 6V
- LOW POWER DISSIPATION: ICC = 4µA(MAX.) at TA=25°C
- COMPATIBLE WITH TTL OUTPUTS: VIH = 2V (MIN.) VIL = 0.8V (MAX)
- SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 6mA (MIN)
- BALANCED PROPAGATION DELAYS: tPLH ? tPHL
- PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 574
Характеристики
| Бренд | STMicroelectronics |
|---|---|
| Описание продукта | 13 x 7.6 x 2.45 mm |
| Maximum H | -6 mA |
| Bus Hold | Нет |
| Polarity | Non-Inverting |
| Number Of | 8 |
| Number Of | 8 |
| Triggering Type | Positive-Edge |
| Рабочая температура | -55 to 125 °C |
| Input Sig | Single-Ended |
| Maximum L | 6 mA |
| Number Of | 1 |
| Maximum P | 36@4.5V ns |
| Maximum O | 5.5 V |
| Maximum Q | 0.004 mA |
| Output Si | Single-Ended |
| Logic Function | D-Type Bus Interface |
| Number Of | 8 |
| Propagati | 150 pF |
| Minimum O | 4.5 V |
| Lead Finish | Gold |
| Supplier | SOP |
| Max Proce | 260|300 |
| Typical O | 5 V |
| Msl Level | 3 |
| Schedule B | 8542310000 |
| HTSN | 8542310001 |
| Страна происхождения | Malaysia |
| Number Of | 1 |
| Output Type | 3-State |
SKU: M74HCT574RM13TR