Flash Card 64G-byte 3.3V Embedded MMC BGA

The SDIN9DW4 Extreme is an Embedded Flash Drive (EFD) designed for mobile handsets and consumer electronic devices. SDIN9DW4 Extreme is a hybrid device combining an embedded thin flash controller and standard MLC NAND flash memory, with an industry standard e.MMC 5.01 interface.Empowered with the new e.MMC 5.0 features such as HS400 interface, Product State Awareness, FFU, as well as legacy e.MMC 4.51 features such as Power Off Notifications, Packed commands, Cache, Boot / RPMB partitions, HPI, and HW Reset, the SDIN9DW4 Extreme e.MMC is the optimal device for reliable code and data storage.Designed specifically for mobile multimedia applications, SDIN9DW4 Extreme is the most mature on board MMC device since 2005, providing mass storage of up to 64GB in JEDEC compatible form factors, with low power consumption and high performance - an ideal solution for multimedia handsets of 3G and 4G.In addition to the high reliability and high system performance offered by the current SDIN9DW4 family of products, SDIN9DW4 Extreme offers plug-and-play integration and support for multiple NAND technology transitions, as well as features such as an advanced power management scheme.The SDIN9DW4 Extreme uses advanced Multi-Level Cell (MLC) NAND flash technology, enhanced by embedded flash management software running as firmware on the flash controller.The SDIN9DW4 Extreme architecture and embedded firmware fully emulates a hard disk to the host processor, enabling read/write operations that are identical to a standard, sector-based hard drive. In addition, firmware employs patented methods, such as virtual mapping, dynamic and static wear-leveling, and automatic block management to ensure high data reliability and maximizing flash life expectancy.The SDIN9DW4 Extreme provides up to 64GB of memory for use in mass storage applications. In addition to the mass-storage-specific flash memory chip, SDIN9DW4 Extreme includes an intelligent controller, which manages interface protocols, data storage and retrieval, error correction code (ECC) algorithms, defect handling and diagnostics, power management and clock control.

• Memory controller and NAND flash
• Mechanical design complies with JEDED Specification
• Offered in three TFBGA packages of e.MMC 5.02
  • 11.5mm x 13mm x 1.0mm (16GB, 32GB, 64GB)
• Operating temperature range: -25°C to +85°C
• Dual power system
• Core voltage (Vcc) 2.7-3.6 V
• I/O (Vccq) voltage, either: 1.7-1.95V or 2.7-3.6V
• Note: Device operation under 3.3V Vccq is limited to Max 1 hour
• Up to 64GB of data storage
• Supports three data bus widths: 1bit (default), 4bit, 8bit
• Complies with e.MMC Specification Ver. 5.0 HS400
• Variable clock frequencies of 0-20 MHz, 0-26 MHz (default), 0-52 MHz (high-speed), 0-200MHz SDR (HS200), 0-200 MHz DDR (HS400)
• Up to 400 MB/sec bus transfer rate, using 8 parallel data lines at 200 MHz, HS400 Mode
• Correction of memory field errors
• Designed for portable and stationary applications that require high performance and reliable data storage