Flash Card 2G-byte 5V Embedded USB Flash Drive

The industrial grade eUSB Drive is a robust "SLC" flash based hard drive designed for use as the main boot and storage device for embedded systems. The small form factor, low power consumption and fast access time are important advantages a eUSB Drive has over traditional hard drives. The drive uses a USB 2.0 High Speed serial link providing a simple two wire signaling interface to the host.The eUSB Drive is available in size 2GB, Commercial or Industrial temperature, and 5V power. The drive is capable of sustained read speeds 33MB/s and write speeds 17MB/s. The time to access a random location is typically less than 1 ms for the drive.

• Universal Serial Bus 2.0 (Hi-Speed USB) compatible
• 2 wire small form factor USB interface to host
• Industry standard header, or low profile stacking header for connecting to the host
• Read Speed 33 MB/s and write Speed 17 MB/s
• 2GB Capacity
• BCH Error Correction Code - corrects up to 8 bit errors per 512 byte sector
• Low power Dissipation- less than .45W active (0.68W for 5V version) and less than 1mW standby
• Dynamic and Static Wear Leveling
• Commercial Temp range 0°C to 70°C
• Industrial Temp range -40°C to 85°C
• Firmware upgradeable via USB bus
• Support USB Mass Storage Class requirements for Boot ability
• Remote Write Protect and drive Reset Control options available
• Life Monitoring (Vendor Commands)
• Descriptors programmed into 256 Bytes of Attribute Memory
• Legacy 2mm Connector (0.144in high)