Flash Card 256G-byte 5V Solid State Drive 22-Pin Tray

Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures. The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.

• Micron® 25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
  • PIO mode 3, 4
  • Multiword DMA mode 0, 1, 2
  • Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-command slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password login support
• Secure erase (data page) command set: fast and secure erase
• Self-monitoring, analysis, and reporting technology (SMART) command set
• Performance1, 2
  • Sequential 128k READ: up to 500 MB/s
  • Sequential 128k WRITE: up to 260 MB/s
  • Random 4k READ: up to 45,000 IOPS
  • Random 4k WRITE: up to 50,000 IOPS
  • PCMark® Vantage (HDD test suite score): up to 75,000
  • READ/WRITE latency: 55µs (TYP)
• Reliability
  • MTTF: 1.2 million device hours3
  • Static and dynamic wear leveling
  • Uncorrectable bit error rate (UBER): <1 sector per 1015 bits read
  • Low power consumption
  • <280mW TYP4
• Endurance: Total bytes written (TBW) - 72TB
• Capacity5 (unformatted): 128GB, 256GB, 512GB
• Mechanical - 9.5mm height
  • SATA connector: 5V ±10%
  • 2.5-inch drive: 100.5mm x 69.85mm x 9.5mm
  • Weight: 75g (MAX)
• Mechanical - 7.0mm height
  • SATA connector: 5V ±10%
  • 2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
  • Weight: 73g (MAX)
• Field-updateable firmware
• Operating temperature
  • Commercial (0°C to +70°C)6