Flash Card 128G-byte 3.3V Solid State Drive 52-Pin

Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an JEDEC- standard mSATA form factor, the SSD integrates easily in existing storage infrastructures. The SSD is designed to use the SATA interface efficiently during both reads and writes while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.

• Micron® 25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
  • PIO mode 3, 4
  • Multiword DMA mode 0, 1, 2
  • Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Native command queuing support with 32-command slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password login support
• Security erase (data page) command set: fast and secure erase
• Self-monitoring, analysis, and reporting technology (SMART) command set
• 64GB performance (steady state)1, 2
  • Sequential 64KB read: 440 MB/s
  • Sequential 64KB write: 100 MB/s
  • Random 4KB read: 59,000 IOPS
  • Random 4KB write: 1500 IOPS
  • Random 8KB read: 22,000 IOPS
  • Random 8KB write: 750 IOPS
  • Average READ latency: 1ms
  • Average WRITE latency: 21ms
• 128GB performance (steady state)1, 2
  • Sequential 64KB read: 440 MB/s
  • Sequential 64KB write: 170 MB/s
  • Random 4KB read: 60,000 IOPS
  • Random 4KB write: 2200 IOPS
  • Random 8KB read: 27,000 IOPS
  • Random 8KB write: 1150 IOPS
  • Average READ latency: 0.5ms
  • Average WRITE latency: 15ms
• 256GB performance (steady state)1, 2
  • Sequential 64KB read: 440 MB/s
  • Sequential 64KB write: 240 MB/s
  • Random 4KB read: 44,700 IOPS
  • Random 4KB write: 2600 IOPS
  • Random 8KB read: 31,800 IOPS
  • Random 8KB write: 1450 IOPS
  • Average READ latency: 0.7ms
  • Average WRITE latency: 12ms
• Reliability
  • Mean time to failure (MTTF): 1.2 million device hours3
  • Static and dynamic wear leveling
  • Uncorrectable bit error rate (UBER): <1 sector per 1015 bits read
• Low power consumption
  • <200mW TYP
• Endurance: total bytes written (TBW) - 72TB
• Capacity4 (unformatted): 64GB, 128GB, 256GB
• Mechanical: 5mm height
  • mSATA connector: 3.3V ±5%
  • Caseless design: 50.80mm x 29.85mm x 3.75mm
  • Weight: 10g (MAX)
• Field-updateable firmware
• Operating temperature
  • Commercial (0°C to +70°C)5