EA LPC11D14 Series Microcontroller Evaluation Board

The EA LPC11D14 Evaluation Board allows you to quickly and easily evaluate the LPC11D1x family of microcontrollers. The microcontroller, board and accompanying features make it a great starting point for your next Cortex-M0 project. Populated with the LPC11D14 to demonstrate LPC11D1x features, the LPC11D14 board allows the evaluation of the low-cost LCD solution of the LPC11D14.

All LPC11D14 pins are available on expansion connectors around the processor

UART-to-USB bridge interface for LPC11D14 UART, with mini-B USB connector and proper ESD protection

Flexible powering, with on-board 800 mA 3.3 V voltage regulator. Can be powered from USB connector, JTAG connector (if supported by JTAG device) or an external +5 V supply

All LPC11D14 pins are available on connector

mini-B USB connector

SWD/JTAG connector (50 mil / 1.27 mm pitch, standard SWD/JTAG connector). Pad for older, larger 20 pos 100 mil pitch JTAG connector also exists, but connector not soldered

LCD with 8 14-segment characters

LM75 I²C temperature sensor

Trimming potentiometer on analog input

4 capacitive sensors

Onboard reset generation and reset push-button

Push-button for enabling Bootloader mode of the LPC11D14

Push-button for enabling start logic of the LPC11D14

Push-button for wakeup logic of the LPC11D14

Possibility to measure current consumption for LPC11D14 core, I/O and LCD controller parts individually

LED on pin PIO0_7