dsPIC33E 16-bit Digital Signal Controller USB Starter Kit

The dsPIC33E USB Starter Kit provides a low cost method for the development and testing of USB OTG, Host and Device applications on the 60 MIPS dsPIC33E DSC family. The board contains an on-board programming/debugger, standard A USB and micro A/B connectors, three user-programmable LEDs, three push button switches and an expansion header compatible with the Multimedia Expansion Board (DM320005) and I/O Expansion Board (DM320002). The starter kit comes preloaded with basic Communication Device Class (CDC) demonstration software. Programming, Running and Debugging Applications. Use the following procedure for programming/debugging your application programs Using MPLAB IDE, open the project C:\dsPIC33E PIC24E USB Starter Kit Demo\Firmware\ USB Device - CDC - Basic Demo - dsPIC33E USB Starter Kit.mcp. (This assumes that the demo was installed in the default location) Connect the starter kit to your PC using the provided USB mini-B to full-sized A cable. Note that the jumper in J5 should not be installed. Choose “Starter Kit On Board” as the debugger tool in MPLAB IDE by selecting Debugger > Select Tool> Starter Kit On Board. Choose the debug build configuration by selecting Project > Build Configuration > Debug. Build the project by selecting Project > Build All. Download the code into the starter kit by selecting Debugger > Program. Run the downloaded application software by selecting Debugger > Run. At this time LED2 on the starter kit should turn on.

• On-board programming/debugger
• Standard A USB and micro A/B connectors
• Three user-programmable LEDs
• Three push button switches