Digital Potentiometer Nonvolatile I2C-Interface 256-Tap 100kOhm 8-Pin TDFN EP

The MAX5417/MAX5418/MAX5419 nonvolatile, linear-taper, digital potentiometers perform the function of a mechanical potentiometer by replacing the mechanics with a simple 2-wire digital interface, allowing communication with multiple devices. Each device performs the same function as a discrete potentiometer or variable resistor and has 256 tap points. The devices feature an internal, nonvolatile EEPROM used to store the wiper position for initialization during power-up. The fast-mode I²C-compatible serial interface allows communication at data rates up to 400kbps, minimizing board space and reducing interconnection complexity in many applications. Each device is available with one of four factory-preset addresses (see the Ordering Information/Selector Guide in the full data sheet) and features an address input for a total of eight unique address combinations. The MAX5417/MAX5418/MAX5419 provide three nominal resistance values: 50kO (MAX5417), 100kO (MAX5418), or 200kO (MAX5419). The nominal resistor temperature coefficient is 35ppm/°C end-to-end, and only 5ppm/°C ratiometric. This makes the devices ideal for applications requiring a low-temperature-coefficient variable resistor, such as low-drift, programmable gain-amplifier circuit configurations. The MAX5417/MAX5418/MAX5419 are available in a 3mm x 3mm 8-pin TDFN package, and are specified over the extended -40°C to +85°C temperature range.

• Power-On Recall of Wiper Position from Nonvolatile Memory
• Tiny 3mm x 3mm 8-Pin TDFN Package
• 35ppm/°C End-to-End Resistance Temperature Coefficient
• 5ppm/°C Ratiometric Temperature Coefficient
• 50kO/100kO/200kO Resistor Values
• Fast I²C-Compatible Serial Interface
• 500nA (typ) Static Supply Current
• Single-Supply Operation: +2.7V to +5.25V
• 256 Tap Positions
• ±0.5 LSB DNL in Voltage-Divider Mode
• ±0.5 LSB INL in Voltage-Divider Mode
• EV Kit Available