Digital Multi-Phase Buck Controller 48-Pin QFN EP T/R

The NCP5393A is a multiphase synchronous buck regulator controller designed to power the Core and Northbridge of an AMD microprocessor. The controller has a user configurable two, three, or four phase regulator for the Core and an independent single phase regulator to power the microprocessor Northbridge. The NCP5393A incorporates differential voltage sensing, differential phase current sensing, optional load-line voltage positioning, and programmable VDD and VDDNB offsets to provide accurately regulated power parallel- and serial-VID AMD processors. Dual-edge multiphase modulation provides the fastest initial response to dynamic load events. This reduces system cost by requiring less bulk and ceramic output capacitance to meet transient regulation specifications. High performance operational error amplifiers are provided to simplify compensation of the VDD and VDDNB regulators. Dynamic Reference Injection further simplifies loop compensation by eliminating the need to compromise between response to load transients and response to VID code changes. Meets AMD’s Hybrid VR Specifications Up to Four VDD Phases Single-Phase VDDNB Controller Dual-Edge PWM for Fastest Initial Response to Transient Loading High Performance Operational Error Amplifiers Internal Soft Start and Slew Rate Limiting Dynamic Reference Injection (Patent #US07057381) DAC Range from 12.5 mV to 1.55 V 0.5% DAC Accuracy fro 0.8 V to 1.55 V VDD and VDD Offset Ranges 0 mV - 800 mV True Differential Remote Voltage Sense Amplifiers Phase-to-Phase IDD Current Balancing Differential Current Sense Amplifiers for Each Phase of Each Output "Lossless" Inductor Current Sensing for VDD and VDDNB Outputs Supports Load Lines (Droop) for VDD and VDDNB Outputs Oscillator Range of 100 kHz - 1 MHz Tracking Over Voltage Protection Output Inductor DCR-Based Over Current Protection for VDD and VDDNB Outputs Guaranteed Startup into Precharged Loads Temperature Range: 0°C to 70°C This is a Pb-Free Device