DC Motor Driver 14-Pin DSO

The TLE 4206-4G is a protected H-Bridge Driver designed specifically for automotive headlight beam control applications with DC-brush motor loads. The part is built using Infineon’s bipolar high voltage power technology DOPL. The standard enhanced power PG-DSO-14-22 package meets the application requirements and saves PCB-board space and costs. The servo-loop-parameter pos.- and neg. Hysteresis, pos.-and neg. deadband and angle-amplification are programmable with external resistors. An internal window-comparator controls the input line. In case of fault conditions, like short circuit to GND, short circuit to supply-voltage, and broken wire, the TLE 4206-4G stops the motor immediately and enters active braking (brake high). The device also incorporates integrated features like over- and under voltage-lockout, short-circuit-protection and over-temperature-protection. The TLE 4206-4G is a derivate of the TLE 4206-2G. The Range pin not only offers short circuit protection at the reference potentiometer but also determines the potentiometer’s voltage range of operation. The TLE 4206-4G considers a smaller window of operation by way of increasing the lower Range Switch off and on thresholds to serve a larger variety of reference potentiometer strokes.

Ideal for manual and automatic-static headlight beam control applications with DC motor loads

Delivers up to 0.8 A continuous

Range low-voltage detection with hysteresis; Lower switch-off threshold @ 1.34V typ

Low saturation voltage; typ.1.2 V total @ 25°C; 0.4 A

Output protected against short circuit

Over temperature protection with hysteresis

Over- and under voltage lockout

Internal clamp diodes

Thermally enhanced SO package

Green Product (RoHS compliant)

AEC Qualified