DC DC Cntrlr Single-OUT Step Down 2V to 28V Input 28-Pin QSOP

The MAX8720 step-down controller is intended for core CPU DC-DC converters in notebook computers. It features a dynamically adjustable output, ultra-fast transient response, high DC accuracy, and the high efficiency needed for leading-edge CPU core power supplies. Maxim"s proprietary Quick-PWM quick-response, constant-on-time, PWM control scheme handles wide input/output voltage ratios with ease and provides 100ns "instant-on" response to load transients while maintaining a relatively constant switching frequency. The output voltage can be dynamically adjusted through the 6-bit digital-to-analog converter (DAC) over a 0.275V to 1.850V range in 25mV steps. The MAX8720 has independent four-level logic inputs for setting the suspend voltage (S0–S1). Precision slew-rate control provides "just-in-time" arrival at the new DAC setting, minimizing surge currents to and from the battery. The internal DAC of the MAX8720 is synchronized to the slew-rate clock for improved operation under aggressive power management of newer chipsets and operating systems that can make incomplete mode transitions. Remote feedback and ground-sense inputs allow easy compensation for IR drops in PC board traces. Single-stage buck conversion allows these devices to directly step down high-voltage batteries for the highest possible efficiency. Alternatively, two-stage conversion (stepping down the 5V system supply instead of the battery) at a higher switching frequency allows the minimum possible physical size. The MAX8720 is available in a 28-pin QSOP or 36-pin 6mm x 6mm thin QFN package.

• Quick-PWM Architecture
• ±1% V_OUT Accuracy Over Line and Load
• 6-Bit On-Board DAC with Input Muxes
• Precision-Adjustable V_OUT Slew Control
• 0.275V to 1.850V Output Adjust Range
• Remote Feedback and Ground Sense
• Supports Voltage-Positioned Applications
• 2V to 28V Battery Input Range
• 200kHz/300kHz/550kHz/1000kHz Switching Frequency
• Over/Undervoltage Protection
• Drives Large Synchronous-Rectifier FETs
• 800µA (typ) I_CC Supply Current
• 10µA (typ) Shutdown Supply Current
• 2V ±0.75% Reference Output
• PGOOD Blanking During Transition