DAC 8-CH 10-bit 24-Pin TSSOP

The MAX5590–MAX5595 octal, 12/10/8-bit, voltage-output digital-to-analog converters (DACs) offer buffered outputs and a 3µs maximum settling time at the 12-bit level. The DACs operate from a +2.7V to +5.25V analog supply and a separate +1.8V to +5.25V digital supply. The 20MHz 3-wire serial interface is compatible with SPI, QSPI, MICROWIRE, and digital signal processor (DSP) protocol applications. Multiple devices can share a common serial interface in direct-access or daisy-chained configuration. The MAX5590–MAX5595 provide two multifunction, user-programmable, digital I/O ports. The externally selectable power-up states of the DAC outputs are either zero scale, midscale, or full scale. Software-selectable FAST and SLOW settling modes decrease settling time in FAST mode, or reduce supply current in SLOW mode. The MAX5590/MAX5591 are 12-bit DACs, the MAX5592/MAX5593 are 10-bit DACs, and the MAX5594/MAX5595 are 8-bit DACs. The MAX5590/MAX5592/MAX5594 provide unity-gain-configured output buffers, while the MAX5591/MAX5593/MAX5595 provide force-sense-configured output buffers. The MAX5590–MAX5595 are specified over the extended -40°C to +85°C temperature range, and are available in space-saving 24-pin and 28-pin TSSOP packages.

• Octal, 12/10/8-Bit Serial DACs in TSSOP Packages
• 3µs (max) 12-Bit Settling Time to 1/2 LSB
• Integral Nonlinearity:
  • 1 LSB (max) MAX5590/MAX5591 A-Grade (12-Bit)
  • 1 LSB (max) MAX5592/MAX5593 (10-Bit)
  • 1/2 LSB (max) MAX5594/MAX5595 (8-Bit)

Guaranteed Monotonic, ±1 LSB (max) DNL

Two User-Programmable Digital I/O Ports

Single +2.7V to +5.25V Analog Supply

+1.8V to AV_DD Digital Supply

20MHz, 3-Wire, SPI-/QSPI-/MICROWIRE-/DSP-Compatible Serial Interface

Glitch-Free Outputs Power Up to Zero Scale, Midscale, or Full Scale Controlled by PU Pin

Unity-Gain or Force-Sense-Configured Output Buffers