DAC 2-CH 8-bit 14-Pin TSSOP

The MAX5290–MAX5295 dual, 12-/10-/8-bit, voltage-output digital-to-analog converters (DACs) offer buffered outputs and a 3µs maximum settling time at the 12-bit level. The DACs operate from a 2.7V to 5.25V analog supply and a separate 1.8V to 3.6V digital supply. The 20MHz 3-wire serial interface is compatible with SPI, QSPI, MICROWIRE, and digital signal processor (DSP) protocol applications. Multiple devices can share a common serial interface in direct access or daisy-chained configuration. The MAX5290–MAX5295 provide two multifunctional, user-programmable, digital I/O ports. The externally selectable power-up states of the DAC outputs are either zero scale, midscale, or full scale. Software-selectable FAST and SLOW settling modes decrease settling time in FAST mode, or reduce supply current in SLOW mode. The MAX5290/MAX5291 are 12-bit DACs, the MAX5292/MAX5293 are 10-bit DACs, and the MAX5294/MAX5295 are 8-bit DACs. The MAX5290/MAX5292/MAX5294 provide unity-gain-configured output buffers, while the MAX5291/MAX5293/MAX5295 provide force-sense-configured output buffers. The MAX5290–MAX5295 are specified over the extended -40°C to +85°C temperature range, and are available in space-saving 4mm x 4mm, 16-pin thin QFN and 6.5mm x 5mm, 14-pin and 16-pin TSSOP packages.

• Dual, 12-/10-/8-Bit Serial DACs in 4mm x 4mm Thin QFN and TSSOP Packages
• 3µs (max) 12-Bit Settling Time to 1/2 LSB
• Integral Nonlinearity
  • 1 LSB (max) MAX5290/MAX5291 A-Grade (12-Bit)
  • 1 LSB (max) MAX5292/MAX5293 (10-Bit)
  • 1/2 LSB (max) MAX5294/MAX5295 (8-Bit)

Guaranteed Monotonic, ±1 LSB (max) DNL

Two User-Programmable Digital I/O Ports

Single +2.7V to +5.25V Analog Supply

+1.8V to AV_DD Digital Supply

20MHz 3-Wire SPI-/QSPI-/MICROWIRE- and DSP-Compatible Serial Interface

Glitch-Free Outputs Power Up to Zero Scale, Midscale or Full Scale

Unity-Gain- or Force-Sense-Configured Output Buffers