Current Mode PWM Controller 28-Pin SOIC W

The ISL6551 is a zero voltage switching (ZVS) full-bridge PWM controller designed for isolated power systems. This part implements a unique control algorithm for fixed-frequency ZVS current mode control, yielding high efficiency with low EMI. The two lower drivers are PWM controlled on the trailing edge and employ resonant delay while the two upper drivers are driven at a fixed 50% duty cycle. This IC integrates many features in 28 Ld SOIC package to yield a complete and sophisticated power supply solution. Control features include programmable soft-start for controlled start-up, programmable resonant delay for zero voltage switching, programmable leading edge blanking to prevent false triggering of the PWM comparator due to the leading edge spike of the current ramp, adjustable ramp for slope compensation, drive signals for implementing synchronous rectification in high output current, ultra high efficiency applications and current share support for paralleling up to 10 units, which helps achieve higher reliability and availability as well as better thermal management. Protective features include adjustable cycle-by-cycle peak current limiting for overcurrent protection, fast short-circuit protection (in hiccup mode), a latching shutdown input to turn off the IC completely on output overvoltage conditions or other extreme and undesirable faults, a non-latching enable input to accept an enable command when monitoring the input voltage and thermal condition of a converter and VDD undervoltage lockout with hysteresis. Additionally, the ISL6551 includes high current high-side and low-side totem-pole drivers to avoid additional external drivers for moderate gate capacitance (up to 1.6nF at 1MHz) applications, an uncommitted high bandwidth (10MHz) error amplifier for feedback loop compensation, a precision bandgap reference with ±1.5% (ISL6551AB) or ±1% (ISL6551IB) tolerance across recommended operating conditions and a ±5% “in regulation” monitor.

• High speed PWM (up to 1MHz) for ZVS full bridge control
• Current mode control compatible
• High current high-side and low-side totem-pole drivers
• Adjustable resonant delay for ZVS
• 10MHz error amplifier bandwidth
• Programmable soft-start
• Precision bandgap reference
• Latching shutdown input
• Non-latching enable input
• Adjustable leading edge blanking
• Adjustable dead time control
• Adjustable ramp for slope compensation
• Fast short-circuit protection (hiccup mode)
• Adjustable cycle-by-cycle peak current limiting
• Drive signals to implement synchronous rectification
• VDD undervoltage lockout
• Current share support
• ±5% “in regulation” indication
• Pb-free (RoHS compliant)