Current Mode PWM Controller 1.5A 16-Pin LLP EP T/R

The LM5041A PWM controller contains all of the features necessary to implement either current-fed or voltage-fed push-pull or bridge power converters. These “Cascaded” topologies are well suited for multiple output and higher power applications. The LM5041A’s four control outputs include: the buck stage controls (HD and LD) and the push-pull control outputs (PUSH and PULL). Push-pull outputs are driven at 50% nominal duty cycle at one half of the switching frequency of the buck stage and can be configured for either an overlap time (for current-fed applications) or a both-off time (for voltage-fed applications). Push-pull stage MOSFETs can be driven directly from the internal gate drivers while the buck stage requires an external driver such as the LM5102. The LM5041A includes a high-voltage start-up regulator that operates over a wide input range of 15V to 100V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 1 MHz and total propagation delays of less than 100ns. Additional features include: line Under-Voltage Lockout (UVLO), soft-start, an error amplifier, precision voltage reference, and thermal shutdown.The two differences between the LM5041 and the LM5041A are: No second level current limit in the "A" version No softstart (SS) shutdown comparator in the "A" version. 

Internal Start-up Bias Regulator

Programmable Line Under-Voltage Lockout (UVLO) with Adjustable Hysteresis

Current Mode Control

Internal Error Amplifier with Reference

Cycle-by-cycle Over-Current Protection

Leading Edge Blanking

Programmable Push-Pull Overlap or Dead Time

Internal 1.5A Push-Pull Gate Drivers

Programmable Soft-Start

Programmable Oscillator with Sync Capability

Precision Reference

Thermal Shutdown