Conv DC-DC Single Inv 8-Pin PDIP N
The MAX635 inverting switching regulators are designed for minimum component DC-DC conversion in the 5mW to 500mW range. Low power applications require only a diode, output filter capacitor, and a low-cost inductor. An additional MOSFET and driver are needed for higher power applications. Low battery detection circuitry is included on chip. The MAX635 are preset for -5V outputs, respectively. However, the regulators can be set to other levels by adding 2 resistors. A broad line of step-up, step-down, and inverting DC-DC converters, with features such as logic-level shutdown, adjustable oscillator frequency, and external MOSFET drive.
- Preset -5V Output Voltages
- Adjustable Output with 2 Resistors
- 85% Typ Efficiency
- Only 3 External Components
- 80µA Typ Operating Current
- Low Battery Detector
Характеристики
| Бренд | Maxim Integrated |
|---|---|
| Описание продукта | 9.91 x 7.87 x 4.45 mm |
| Lead Finish | Matte Tin |
| Рабочая температура | -40 to 85 °C |
| Schedule B | 8542390000 |
| HTSN | 8542390001 |
| Страна происхождения | Thailand |
| Load Regulation | 0.2 %Vo |
| Output Voltage | -5 V |
| Operating | 2.3 to 16.5 V |
| Supplier | PDIP N |
| Type Prod | Inverting |
| Line Regulation | 0.5 %Vo |
| Screening Level | Extended |
| Output Type | Adjustable|Fixed |
| Efficiency | 85 % |
| Max Proce | 300 |
| Msl Level | 1 |
| Switching | Да |
| Switching | 56 kHz |
| Number Of | 1 |
| Output Current | 0.525 A |
SKU: MAX635AEPA+