Constant Voltage And Current Controller 6-Pin SOT-23 T/R

The device is a highly integrated solution for SMPS applications, with an LED pilot-lamp requiring a dual control loop to perform CV (constant voltage) and CC (constant current) regulation.The IC allows very efficient LED pilot-lamp driving which helps to reduce the standby consumption of the SMPS. It integrates a voltage reference, two op-amps (with OR-ed open-drain outputs), a low-side current sensing circuit and an LED pilot-lamp driver pin implemented with an open-drain mosfet driven by square waveform with 12.5% duty cycle at 1 kHz that allows reducing LED consumption.The voltage reference, along with one op-amp, is the core of the voltage control loop. The current sensing circuit and the other op-amp make up the current control loop.The external components needed to complete the two control loops are:- a resistor divider that senses the output of the power supply and fixes the voltage regulation setpoint at the specified value- a sense resistor that feeds the current sensing circuit with a voltage proportional to the DC output current; this resistor determines the current regulation setpoint and must be adequately rated in terms of power dissipation- the frequency compensation components (R-C networks) for both loops.The device is ideal for space-critical applications.

Constant voltage and constant current control

Very efficient LED pilot-lamp driver

Wide operating V_CCrange (3.5 V - 36 V)

Low quiescent consumption: 250 µA

Voltage reference: 2.5 V

Voltage control loop accuracy ± 0.5%

Current sense threshold: 50 mV

Current control loop accuracy ± 4%

Low external component count

Open-drain output stage

SOT23-6L package