Comparator Single R-R O/P 5.5V 6-Pin UCSP

The MAX9025–MAX9028 nanopower comparators in space-saving chip-scale (UCSP) packages feature Beyond-the-Rails inputs and are guaranteed to operate down to +1.8V. The MAX9025/MAX9026 feature an on-board 1.236V ±1% reference and draw an ultra-low supply current of only 1µA, while the MAX9027/MAX9028 (without reference) require just 0.6µA of supply current. These features make the MAX9025–MAX9028 family of comparators ideal for all 2-cell battery-monitoring/management applications. The unique design of the output stage limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. The MAX9025/MAX9027 have a push-pull output stage that sinks and sources current. Large internal-output drivers allow rail-to-rail output swing with loads up to 5mA. The MAX9026/MAX9028 have an open-drain output stage that makes them suitable for mixed-voltage system design. All devices are available in the miniature 6-bump UCSP packages. Refer to the MAX9117 data sheet for similar comparators in 5-pin SC70 packages and the MAX9017 data sheet for similar dual comparators in 8-pin SOT23 packages.

• Space-Saving UCSP Package (1mm x 1.52mm)
• Ultra-Low Supply Current
  • 0.6µA (MAX9027/MAX9028)
  • 1µA with Reference (MAX9025/MAX9026)

Guaranteed to Operate Down to +1.8V

Internal 1.236V ±1% Reference (MAX9025/MAX9026)

Input Voltage Range Extends 200mV Beyond-the-Rails

CMOS Push-Pull Output with ±5mA Drive Capability (MAX9025/MAX9027)

Open-Drain Output Versions Available (MAX9026/MAX9028)

Crowbar-Current-Free Switching

Internal Hysteresis for Clean Switching

No Phase Reversal for Overdriven Inputs