Clock Driver 2-IN ECL 20-Pin SOIC W T/R

The MC100EL14 is a low skew 1:5 clock distribution chip designed explicitly for low skew clock distribution applications. The pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V and V via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V should be left open.The EL14 features a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock. When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential clock input.The common enable (EN) is synchronous so that the outputs will only be enabled/disabled when they are already in the LOW state. This avoids any chance of generating a runt clock pulse when the device is enabled/disabled as can happen with an asynchronous control. The internal flip flop is clocked on the falling edge of the input clock, therefore all associated specification limits are referenced to the negative edge of the clock input.

• 50 ps Output-to-Output Skew
• Synchronous Enable/Disable
• Multiplexed Clock Input
• ESD Protection: > 2 KV HBM, > 200 V MM
• The 100 Series Contains Temperature Compensation
• PECL Mode Operating Range: V_CC = 4.2 V to 5.7 V with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V with V_EE = -4.2 V to -5.7 V
• Internal Input Pulldown Resistors on CLK, SCLK, SEL, and ENbar.
• Q Output will Default LOW with Inputs Open or at V_EE
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
• Transistor Count = 303 devices
• Pb-Free Packages are Available