Clock Buffer 2-OUT 8-Pin DSBGA T/R

The CDC3RL02 is a two-channel clock fan-out buffer. It buffers a single master clock, such as a temperature compensated crystal oscillator (TCXO) to multiple peripherals. The device has two clock request inputs (CLK_REQ1 and CLK_REQ2), each of which enable a single clock output.The CDC3RL02 accepts square or sine waves at the master clock input (MCLK_IN), eliminating the need for an AC coupling capacitor. The smallest acceptable sine wave is a 0.3-V signal (peak-to-peak). CDC3RL02 has been designed to offer minimal channel-to-channel skew, additive output jitter, and additive phase noise. The adaptive clock output buffers offer controlled slew-rate over a wide capacitive loading range which minimizes EMI emissions, maintains signal integrity, and minimizes ringing caused by signal reflections on the clock distribution lines.The CDC3RL02 has an integrated Low-Drop-Out (LDO) voltage regulator which accepts input voltages from 2.3 V to 5.5 V and outputs 1.8 V, 50 mA. This 1.8V supply is externally available to provide regulated power to peripheral devices such as a TCXO.The CDC3RL02 is ideal for use in portable end-equipment, such as mobile phones, that require clock buffering with minimal additive phase noise and fan-out capabilities. It is offered in a 0.4-mm pitch wafer-level chip-scale (WCSP) package (0.8 mm × 1.6 mm) and is optimized for very low standby current consumption.

Low Additive Noise:

• –149 dBc/Hz at 10-kHz Offset Phase Noise
• 0.37-ps (RMS) Output Jitter

Limited Output Slew Rate for EMI Reduction
(1- to 5-ns/Rise/Fall Time for 10-pF to 50-pF Loads)

Adaptive Output Stage Controls Reflection

Regulated 1.8-V Externally Available I/O Supply

Ultra-Small 8-bump YFP 0.4-mm Pitch WCSP (0.8 mm × 1.6 mm)

EESD Performance Exceeds JESD 22

• 2000-V Human-Body Model (A114-A)
• 1000-V Charged-Device Model (JESD22-C101-A Level III)

APPLICATIONS

• Cellular Phones
• Global Positioning Systems (GPS)
• Wireless LAN
• FM Radio
• WiMAX
• W-BT